Influenza A/B Antigen Test Strip

Influenza A/B Antigen Test Strip (A+B型流感诊断试纸条) is a one-step qualitative lateral flow rapid diagnostic test kit, based on the Colloidal Gold Chromatographic Immuno Double Antibody Sandwich principle, which is used to detect Influenza AB nucleoproteins in human Throat & Nasal Swab specimen.

Detailed information for Influenza A/B Antigen Test Strip is provided below, including:

  1. General and Technical information of this FLU A&B test kit;
  2. Packing specification of this FLU A&B Dipstick style test kit (gross weight in full kit package and in bulk packing);
  3. Specimen used to carry out the assay, and the requirements on specimen collection, storage and processing; and,
  4. Specific immuno assay principle used in this Influenza A & B Test Kit.

Main technical information of this Influenza AB test kit is listed in the following table:

Catalog No.:FLU 831
Description:Influenza A/B Antigen Test Strip
Category:Respiratory Tract Disease
Specimen:Throat & Nasal Swab
No. of Step:One Step
Reading Time:15-20 Minutes
Cut Off:
Specification:5.0 mm
Quan. or Qual.:Qualitative
Flu A Sensitivity:95.3%
Flu A Specificity:99.1%
Flu B Sensitivity:94.7%
Flu B Specificity:98.5%
Assay Principle:Colloidal Gold Chromatographic Immuno Double Antibody Sandwich

The standard kit size of this Influenza A & B Dipstick test kit is 100 tests per box; 48 boxes per carton.

To save freight cost, sometimes bulk packing is used, meaning test strip, cassette or multi-test panel is packed in single aluminum pouch; 50 or 100 pouches in one plastic bag; and then plastic bags are packed in cartons along with the unfolded boxes for the test kits. In this way, the customers can easily pack the tests into test kits after receiving the bulk packed goods.

Tests per Kit:100 Tests
Dimension of Kit Box:21.0 * 12.5 * 5.5 CM
Boxes per Carton:48 Kits
Tests per Carton (BULK):1500 Tests
G.W. per Carton (Boxed):14.5 KG
G.W. per Carton (Bulk):16.0 KG
Carton Dimension:53 * 45 * 36 CM
Carton Volume:0.085 CBM

Materials Provided

  • Test Strip for Influenza A&B Antigens;
  • Disposable sample tubes;
  • Assay diluents;
  • Disposable Droppers (to transfer 300ul of diluent );
  • Sterilized Swabs for Sample collection;
  • Package insert.

To carry out the assay with a Influenza A/B Antigen Test Strip, Throat & Nasal Swab should be collected according to the instructions given in the Instruction For Use included in the test kit. After collecting, it is preferable to perform the testing as early as possible; if not viable, the specimen should be stored properly. A general introduction about the collection, and storage of the specimens is given below.

Throat Swab

To collect a throat swab specimen, vigorously rub a rayon throat swab on both tonsillar surfaces and the posterior pharynx.

Remove swab from mouth and insert, tip down, into paper wrapper.

Nasal Swab Specimen

Use the sterile swab supplied in the kit. Insert this swab into the nostril that presents the most secretion under visual inspection.

With gentle rotation, push the swab until resistance is met at the level of the turbinates (less than one inch in the nostril). Rotate the swab three times against the nasal wall.

Or, insert the swab into nostril parallel to the palate and leave in place for a few seconds to absorb specimens.

Throat & Nasal Swab Storage Condition

It is recommended that swab specimens be processed as soon as possible after collection.

If swabs are not processed immediately they should be placed into a dry, sterile, and tightly sealed plastic tube for storage. Swabs can be stored dry at room temperature for up to 24 hours.

Colloidal Gold Chromatographic Immuno Double Antibody Sandwich method is used in this Influenza A/B Antigen Test Strip to detect the Influenza AB nucleoproteins in human Throat & Nasal Swab specifically. The introduction of this Colloidal Gold Chromatographic Immuno Double Antibody Sandwich testing principle is given blow.

GICA Double Antibody Sandwich Method Illustration

In the double antibody sandwich lateral flow chromatographic rapid test, two antibodies are used to detect viral protein or antigen.

In the test band region, antibody specific to the target antigen or protein is immobilized. In the end of the membrane strip where the samples are added, another antibody conjugated with colloidal gold particles is embedded.

During the testing process, specimen from the patient is added to the end of the membrane strip. The antibody conjugate particles will resolve into the specimen, where the antibody conjugate will react and bound to the target protein or viral antigen, if present.

This antigen-antibody conjugate complex then moves along the strip to the testing band region, under capillary effect. The immobilized antibody in the test line region then bound to another binding site on the antigen complex, and the antibody-antigen-antibody complex is fixed on test band region.

When the complex congregates, the highly concentrated colloidal gold particles will develop some red or pink color, indicate a positive result.

If there is no target protein or antigen in the specimen, the colloidal gold particles will not congregate and no color will develop, indicating a negative result.